Werk-Brau introduces angle brooms for skid steer loaders

Findlay, Ohio-based Werk-Brau skid steer angle brooms can swing 30 degrees left or right of center for effective and efficient cleaning and clearing or snow, dirt, debris, grass and more.

Polypropylene brush with wire filaments provides long service life even in adverse conditions.  Hydraulically driven brooms of 6- or 7-foot widths are powered by a single hydraulic motor capable of 10-22 gpm flow (standard), with dual hydraulic motors (20-44 gpm), or a low flow (8-16 gpm) motor available as options.

A standard skid steer quick coupler and storage stand is provided for simple mounting, dis-mounting, and storage. Broom speeds of up to 200 RPM are attainable, depending on the prime mover, making this Angle Broom an ideal attachment for skid steer loaders of all makes, models, and sizes.

Werk-Brau angle brooms are available with industry leading lead-times; some models are stocked for immediate shipment. Wafer-style brush has a 32-inches outside diameter (OD) x 10 inches inside diameter (ID). Brush core can be installed with either end to the left/right with no effect on sweeping performance, to simplify installation. Brush and core assembly can be removed from frame without disconnecting drive motor hoses. Brush hood is manufactured from 16-gauge steel with formed edge fold for additional strength. Robust end plates are 12-gauge steel for more durability. Brush hood covers 140-degrees of brush and includes pre-drilled holes for easy installation of front deflector. Dirt deflectors are standard on all models.

Brooms are standard with a single, low-speed, high-torque, 18-cid hydraulic motor. Motors are coupled directly to the brush core through a 1.25-inch 14-spline shaft. Motor is mounted outside of brush frame and is protected by formed ¼-inch guards. Hoses are provided from hydraulic motor to bulkhead or valve on broom. A spring system to dampen transportation bounce is included.

Finish is black polyurethane topcoat with epoxy primer for protection from the elements. Steel surface undergoes a phosphatizing acid bath to clean and etch the surface for superior adhesion of primer and paint.

Optional accessories include low flow drive motor, dual standard flow drive motors, dual low flow drive motors, a 45-gallon sprinkler system mounted on the brush hood, sight indicators, an oil cooler, and a hose kit.

Advertisement

Leave a Reply

Your email address will not be published. Required fields are marked *

*